Do not leave any room or cupboards untouched.

The filter screen is the metallic sheet that’s located on the opposite side of the bin to the hinge.. 3.(Optional) Wipe The Dust Bristle.

The Shark’s WV200UK has dust bristles along one of the edges.If there’s visible dirt or dust on these bristles, you can use a dry cloth to clean them.. Don’t press too hard on the bristles when cleaning, however, as this could damage them..Removing The Dust Cup For Cleaning.

You can also fully remove the dust cup for cleaning.You won’t need to do this every time you empty the vacuum, but it’s a good idea to clean the cup whenever there is visible dirt or dust..

Turn off the power, empty the vacuum, and leave the bin hinged downwards.. Slide forward the filter housing to remove it.. Press the orange release tab on the bin and simultaneously pull the cup away from the vacuum.. Handwash the vacuum bin with lukewarm water (do not use any detergents or cleaning products)..

Allow the bin to dry fully before reinserting it into the vacuum..Adding an activated charcoal layer to the Henry is great for preventing odours, but it doesn’t improve the vacuum’s allergen retention.. For this reason, there’s no reason to buy a MicroFresh filter if you’re just looking to improve your vacuum’s filtration efficiency.

Instead, we recommend looking at the Henry Allergy, which comes with a HEPA filter..The good news is that.

the standard Henry.isn’t a terrible choice for allergies.